=== QuickScan 2100 ===

By default this scanner does't read the barcodes codified with the type **Interlead 2 of 5** used to create the books labels.\\
To activate it you must download {{:thot:scanner:datalogicqd2100.pdf|the manual }} of the scanner, open it on the screen, then print the pages:
  * **201** __Interleaved 2 of 5 (I 2 of 5)__,
  * **209** __Interleaved 2 of 5 (I 2 of 5) — cont.__
  * **359-360** __Appendix E Keypad__.
These pages contains the barcodes we need to use in order to reprogram the scanner.
<note> if you like you can use the scanner to read the barcodes directly on the pages displayed on the monitor, but having the pages printed simplify the work.
</note>

== Activate the type I2of5 ==
this is to tell the scanner to activate the type i2of5.
  - go to page 201
  - scan the "ENTER/EXIT PROGRAMMING MODE" barcode
  - scan the "I 2 of 5 = Enable" barcode
  - scan again the "ENTER/EXIT PROGRAMMING MODE" barcode.


== Define the minimum length of the barcode ==
You need to change the minimum length of the type I2of5 barcode from the default, that is 06, to 04.\\ In this occasion the scanner expect always a double digit number, so you must put a leading zero.

  - go to page 209
  - scan the "ENTER/EXIT PROGRAMMING MODE" barcode
  - scan the "Select I 2 of 5 Length 1 Setting" barcode
  - go to page 359
  - scan the "0" and "4" barcodes
  - go to page 209
  - scan the "ENTER/EXIT PROGRAMMING MODE" barcode

== Done ==
The scanner is now ready to scan the barcodes of the books and the barcodes of the Camipro cards without other configuration.

<note> If you wanted to play with the configuration of the scanner, you can reset the programmation to the default using the "Restore Custom Default Configuration" barcode on page **9** __Resetting the Product Configuration to Defaults__ of the manual.
</note>