====== HowTo Setup Barcode Scanner ======

In this HowTo we focus to the **Metrologic Product MS9535 Voyager with OsX using Bluetooth**.\\

=== Essentials to configure the scanner ===
  - Print {{thot:scanner:metrologic-setup.jpg?100}} this page. It's a page with all the codes necessary to configure the scanner.

==== Pair the scanner ====

The first step to do is the pairing of the scanner with the computer host.
  - Check that the scanner is completely charged
  - Scan the first code on the page you printed before
  - From the **System Preferences** open the Bluetooth panel
  - Click the **Set Up New Device** button (in the low right of the windows), in the next window click on **Continue**.
  - Select the **Any Device** button and click **Continue**
  - The system will display all the devices it finds.
  - Check in the **options** panel that the system don't ask a key for pairing.
  - Select the **VoyagerBT** voice and click on **Continue**
    - The name complete of the device is VoyagerBT plus the serial number of the device
  - If all is correct the computer will pair with the scanner and present the Congratulations message. Click on **Quit**.
  - In case of error repeat the procedure from the beginning.

==== Configure the scanner ====
In the default configuration, the scanner will add a CR (Carriage Return) code to all the barcodes it scans and this generate a problem in the program that read the data from the scanner. To resolve this, we need to change the default behaviour of the scanner.\\
  - Pass the scanner over the 3rd barcode (the one labeled **Disable CR Suffix** that is printed on the configuration page printed before. The scanner will emit some **beeps**.